Skip to content

Turnover Size Guide: Pieces, Yardage and How Many for a Quilt

Last updated Researched from specs, manuals and owner reviews We earn from qualifying purchases
Quick answer

A turnover is 80 pieces of 6 x 6 inches, about 1,440 square inches or 0.95 yard of fabric. Sewn as simple patchwork it covers about 1,000 square inches, so a 50 x 65 inch throw top needs about 4 of them and a queen top about 9.

Precuts are bundles of fabric cut to a standard size, usually one or two pieces of every print in a collection. A turnover bundles 80 pieces of 6 x 6 inches. Other names: 6 in half-square triangles.

Turnover at a glance
Piece size6 x 6 in
Pieces80
Total fabric1,440 sq in
Yardage equivalentabout 0.95 yd
Finished patchwork coverageabout 1,000 sq in per pack
NotesModa; 80 pieces, two of each print. Each is half of a 6 in square.

Two triangles sew into one half square triangle that trims to 5 inches finished, giving 5 inch half square triangles, and four of those make a 10 inch finished block.

How many turnovers do you need for each quilt size?

Counts assume the whole top is made from this precut, with triangles paired into half square triangles trimmed to 5 inches finished. Add background fabric, sashing or borders and you need fewer. The table below covers every standard quilt size: a 50 x 65 inch throw top takes about 4 of them and a queen about 9.

Turnovers per quilt top
QuiltTop size (in)Top area (sq in)Turnovers
Baby40 x 401,6002
Crib36 x 521,8722
Lap45 x 602,7003
Throw50 x 653,2504
Twin68 x 906,1207
Twin XL68 x 956,4607
Full / Double83 x 907,4708
Queen90 x 958,5509
King106 x 9510,07011
California King102 x 9910,09811

Measure before you cut

Many precuts have pinked (zigzag) edges. Decide whether you measure from the peaks or the valleys of the zigzag and keep it consistent, or your blocks will not match.

Precut-friendly quilting tools

Prices change often, so confirm on Amazon. As an Amazon Associate we earn from qualifying purchases.

Precuts supply the quilt top only. A 50 x 65 inch throw still needs 3 1/4 yards of 42 inch backing and 7 strips of binding, neither of which comes out of the pack, so add both to the shopping list before you start sewing.

How does a turnover compare with other precuts?

The table below compares every common precut by fabric content: this one holds 1,440 square inches, about 0.95 yards, against 4,200 for a layer cake and 1,050 for a charm pack.

Precut fabric compared
PrecutPiece size (in)PiecesYards equivalentFinished coverage (sq in)
Mini Charm Pack 2 1/2 x 2 1/2420.17168
Charm Pack 5 x 5420.69851
Layer Cake 10 x 10422.783,791
Jelly Roll 2 1/2 x 42402.783,200
Honey Bun 1 1/2 x 42401.671,600
Dessert Roll 5 x 42202.783,600
Turnover 6 x 6800.951,000
Fat Quarter 18 x 2110.25243
Fat Eighth 9 x 2110.12581
Half Yard Cut 18 x 4410.5486
Safety note: Rotary cutters are extremely sharp: close the blade guard whenever you set one down and cut away from your body.

Frequently asked questions

How many pieces are in a turnover?

A typical turnover has 80 pieces, each 6 x 6 inches. Moda; 80 pieces, two of each print. Each is half of a 6 in square. Always check the label, because counts and exact sizes vary by manufacturer and collection, and some pieces are pinked at the edges, which slightly reduces the usable size.

How many turnovers do I need for a throw quilt?

A 50 x 65 inch throw top is 3,250 square inches. With triangles paired into half square triangles trimmed to 5 inches finished, one pack covers about 1,000 square inches, so plan about 4. That is for the patchwork only: sashing, borders, backing and binding need separate yardage.

How many turnovers do I need for a queen quilt?

A 90 x 95 inch queen top is 8,550 square inches, so you would need about 9 at roughly 1,000 square inches each. Many quilters stretch fewer precuts by adding a solid background fabric, wide sashing or a border, which also makes the prints stand out.

How much yardage is a turnover?

A turnover holds about 1,440 square inches of fabric, which is roughly 0.95 yard of 42 inch cotton by area. Precuts give far more print variety than one yard of a single fabric, which is why they cost more per square inch. The trade-off is less flexibility in what you can cut.

Do I need to prewash a turnover?

Most quilters do not. Precut edges fray and distort in the wash, pinked edges lose their shape, and a 6 inch piece has no spare size to give away, since cotton can lose 1 to 2 inches per yard. If you are worried about a saturated red or navy bleeding, test a single piece in hot water with a color catcher rather than washing the whole pack.

Is a turnover cheaper than buying yardage?

Per square inch, no. It holds about 1,440 square inches, roughly 0.95 yards, and costs more than the same yardage of a single print because you are paying for the variety and for the cutting. What you get back is time at the cutting mat, coordinated prints from one collection, and no leftover yards of a fabric you only wanted a little of.

What can I make with one turnover?

One pack covers about 1,000 square inches of finished patchwork, which suits a table runner, pillow, pot holders, a mini quilt or a pieced tote. Combined with background fabric it can become the center of a baby quilt; a 40 x 40 inch baby top made only from these needs about 2.

Sources

  • Moda Fabrics (United Notions) precut definitions: Layer Cake, Charm Pack, Jelly Roll and Mini Charm sizes and counts
  • Manufacturer precut labels from Robert Kaufman, Riley Blake and Art Gallery Fabrics (piece counts vary by collection)
  • Standard quilt top sizes from the site quilt size chart, used for every per-quilt count

How we research: we compare manufacturer specifications, owner manuals, published standards and recurring themes in verified owner reviews. We do not test products in person, and this is researched guidance, not professional advice. Follow your machine manual and pattern, and take care with rotary cutters, hot irons and needles. As an Amazon Associate we earn from qualifying purchases.